NEY "A"
series and "C"
series alloys ARE HIGHLY RECOMMENDED FOR THE
MANUFACTURE OF BELT BUCKLES, BOUTIQUES AND NOVELTY JEWELRY DESIGNED FOR
PLATING AFTER THEY ARE CAST.
" A
"SERIES- A1, A3, A5, A15, A77
" C " SERIES- C1,
C5, C7, C10, C10A
THESE ALLOY
WORK WELL IN BLACK RUBBER AND SILICONE MOLDS. THEY CAN BE ADJUSTED FOR
FLOW. POROSITY IS KEPT TO A MINIMUM BY SPECIAL ALLOY TECHNIQUES AND
THE USE OF QUALITY RAW MATERIALS.
DENSITY:
.38 lbs./cu. in.
ELONGATION:
7%
LIQUIDUS
TEMPERATURE:
498 F
SOLIDUS
TEMPERATURE:
464 F
CASTING
TEMPERATURE:
625 F - 825 F
BRINELL
HARDNESS:
18
TENSILE
STRENGTH:
8,500 p.s.i.
SOLIDIFICATION SHRINKAGE: 2+%
FATIGUE LIMIT (20,000,000 CYCLES): 3600 p.s.i.
SOLDER-ABILITY: Excellent! Contact our sales department for Information
on all of our solder alloys.
FINISHES: Buffed, tumbled, lacquered and electroplated.
PLEASE NOTE: IT
IS VERY IMPORTANT TO AVOID ANY CONTAMINATION OF THESE ALLOYS
Restricted
usage alloy
