PLEASE NOTE THAT THE ITEMS LISTED BELOW HAVE BEEN DISCONTINUED OR THE MINIMUM QUANTITIES HAVE BEEN INCREASED TO 1 METRIC TON OR MORE.
NEY METALS & ALLOYS
Specification Sheet Ney " 7C " Aluminum Solder
We have introduced the Tin-Zinc solders to the electronics industry after a need for cadmium free solders became evident. These solders are produced with virgin metals and are available in a variety of packaging.
Our " 7C " solder is recommended for soldering aluminum to aluminum and aluminum to copper. An external flux , such as our "AFC" Honey flux, is required. The following applications are typical service groups:
Ceramic Capacitor metallizing & soldering.
High voltage applications.
Heating Panel applications.
Spray solder systems.
Metallic Coatings systems (molds, trophies, etc.).
Automatic feed systems.
7C solder has a working temperature from 391 F to 591 F. This range falls between the low temperature "soft" solders and the silver brazing alloys.
Due to the tin content, there is sufficient corrosion resistance and shear strength, while the zinc content dramatically increases the tensile strength.
7C solder comes in .062" diameter wire form on 5 lb. spools as a standard item. We can, however, supply this solder in .125", .057" and .030" diameters.
Bar form, ingots, and if quantities justify, special forms
can be manufactured for dipping, furnace soldering, spray guns or rub tinning
are also available.
Be sure to ask about our FLUXLESS ALUMINUM SOLDER along with any of your additional white metal solder needs.
All inquiries and special orders are welcome, so call TODAY!
Send mail to our webmaster with questions or comments about this web site.