Ney Smelting & Refining Co., Inc.

METALS - WHITE METAL ALLOYS - SOLDERS - FLUXES

===================================================================

269  FREEMAN STREET - BROOKLYN, NY 11222-1295

TEL: (718)389-4900 FAX: (718) 349-2313

Manufacturing : NEW YORK CITY USA

        

       neymetals@erols.com 

 

"D" SERIES

PEWTER, SPIN CAST, RUBBER MOLD ALLOYS

       NEY WHITE CASTING ALLOYS (TIN BASE)

After over a quarter of a century of service to the jewelry and novelty manufacturers, we have developed a complete series of alloys for each situation encountered.

The "D" series alloys are a broad range of alloys which can be produced with various amounts of Antimony and Lead (small amounts of Cadmium available).

The most diversified alloy in this series is our "DM" material for the Jewelry trade and the "DB" alloy for the Novelty and Figurine trade.

Our " DM " (89 metal) and "DB" (92 metal) alloys fall within the ranges shown below.

DENSITY: .25 - .28 lbs./cu.in. @ 68 F

ELONGATION: 40% to 50%

LIQUIDUS TEMPERATURE: 398 F

SOLIDUS TEMPERATURE: 364 F + - 5F

CASTING TEMPERATURE: 450 F - 575 F.

BRINELL HARDNESS: 20

SHEAR STRENGTH: 6,500 psi.

IZOD IMPACT VALUE: 20 ft.-lbs.

SOLDERABILITY: Excellent! Contact our sales department for information on our solder alloys.

FINISHES: Buffed, tumbled, lacquered and electroplated.

PLEASE NOTE: IT IS VERY IMPORTANT TO AVOID CONTAMINATION OF THESE ALLOYS.

For recommendations or SPECIAL ALLOY COMPOSITIONS, please call us at (718) 389-4900.

 

 

SPECIFY NEY

"ENVIRONMENTALLY CORRECT" LEAD FREE ALLOYS, METALS & PRODUCTS