NEY WHITE CASTING ALLOYS (TIN BASE)
After over a quarter of a century of service to the jewelry and novelty
manufacturers, we have developed a complete series of alloys for each situation
encountered.
The "D" series alloys are a broad range of alloys which can
be produced with various amounts of Antimony and Lead (small amounts
of cadmium are available if requested).
The most diversified alloy in this series is our "DM"
material for the Jewelry trade and the "DB" alloy for the Novelty and Figurine
trade.
Our " DM " (89 metal) and "DB" (92 metal) alloys fall within
the ranges shown below.
DENSITY: .25 - .28 lbs./cu.in. @ 68 F
ELONGATION: 40% to 50%
LIQUIDUS TEMPERATURE: 398 F
SOLIDUS TEMPERATURE: 364 F + - 5F
CASTING TEMPERATURE: 450 F - 575 F.
BRINELL HARDNESS: 20
SHEAR STRENGTH: 6,500 psi.
IZOD IMPACT VALUE: 20 ft.-lbs.
SOLDERABILITY: Excellent! Contact our sales department for information on our
solder alloys.
FINISHES: Buffed, tumbled, lacquered and electroplated.
PLEASE NOTE: IT IS VERY IMPORTANT TO AVOID CONTAMINATION OF THESE ALLOYS.
For recommendations or SPECIAL ALLOY COMPOSITIONS, please call us
at (718) 389-4900.
SPECIFY
NEY ENVIRONMENTALLY CORRECT" LEAD
FREE ALLOYS, METALS & PRODUCTS