Safe for the EN-vironment

WE HAVE EXPANDED OUR LINE OF LEAD FREE / CADMIUM FREE ALLOYS FOR THE CENTRIFUGAL SPIN CAST INDUSTRY WITH THE INTRODUCTION OF RECENT, ENVIRONMENTALLY CORRECT ALLOYS THAT ARE COMPARABLE WITH OUR "D" SERIES ALLOYS.

THE BEST SELLING ALLOY IS OUR EN-T ALLOY.  OTHER FORMULAS ARE AVAILABLE.  THE VALUES BELOW ARE APPROXIMATE.

EN-T  (TIN, BISMUTH, COPPER, SILVER) ;

ELONGATION (2" SECTION):          20% - 40%

LIQUIDUS TEMPERATURE:              465 F - 485 F

SOLIDUS TEMPERATURE:               438 F - 465

CASTING TEMPERATURE:F             515 F - 635 F

DENSITY @ 68 F:                          .23  -  .27 lb. /cu. in.

BRINELL HARDNESS:                     18  -  25

TENSILE STRENGTH:-                    5,000 psi - 8700 psi

SOLDERABILITY:    Can be soldered easily with a soft solder and flux

FINISHES:    Mechanical, chemical, organic and electroplated.

FORMS:    Pigs, ingots, bar, shot, powder, wire

(Special forms available)

PLEASE NOTE: IT IS VERY IMPORTANT TO AVOID ANY CONTAMINATION OF THESE ALLOYS. THEY ARE COMPATIBLE AMONG THE "EN" SE AND HAVE BEEN DESIGNED TO PREVENT CONTAMINATION OF OUR POPULAR "D" SERIES ALLOYS. IF MIXED BY ACCIDENT THE ONLY NOTICEABLE PROBLEM IS THE CREATION OF A MUCH WIDER PLASTIC RANGE AND A LONGER SOLIDIFICATION SPIN TIME IN THE MOLD.

PLEASE CONTACT OUR TECHNICAL DEPARTMENT FOR ADDITIONAL INFORMATION ON PROPER VENTING AND GATING TECHNIQUES FOR HIGH POLISH PIECES. SPECIFY NEY 'ENVIRONMENTALLY CORRECT' LEAD FREE ALLOYS, METALS & PRODUCTS

(Sorry! We do not fabricate or cast finished items, however, we sell worldwide and one of our customers may just be able to help!  Call us for more info.)

Please email us for any of your nonferrous needs!

Sales@NeyMetals.com

[ Up ]

Send mail to our webmaster with questions or comments about this web site.
Copyright © 1998 Ney Metals & Alloys
Last modified: September 02, 2008            Our Webmaster: webmaster@neymetals.com

READ THE "MSDS" SHEET BEFORE USING ANY OF OUR PRODUCTS!